Function "Copy File; Function "Next Song - Korg i2 HD Installation Manual

After you have selected the song, press the "LOAD" button to edit the song in the sequencer.
TIPS FOR EDITING SONGS AND STANDARD MIDI FILES:
After the song or Standard MIDI File has been edited, it should be stored to the same memory
location of the hard disk partition!
OPERATIONAL STEPS FOR EDITING SONGS:
a) Load the song into the song memory (please refer to the corresponding section).
b) Edit the song.
c) Use the "DELETE SONG" function on page 5: UTILITY of DISK mode to delete the old song.
d) Select "SAVE ALL SONG" on page 3 of Song mode and save the edited song.
OPERATIONAL STEPS FOR EDITING SMFs:
a) Load the SMF into the SMF memory (please refer to the corresponding section).
b) Edit the SMF.
c) Use the "DELETE FILE" function on page 5: UTILITY of the DISK menu to delete the old SMF.
d) Select "SAVE SMF" on page 3 of File mode and save the edited SMF.

3. Function "COPY FILE"

On Page 5 of DISK mode the menu item "COPY FILE FUNCTION" offers a Direct Copy function. You
can use this function to copy all data (Arrangements, Styles, Songs, Programs) from a floppy disk or
hard disk partition directly to a different hard disk partition.
Select page 5 "UTILITY" of DISK mode. Use the cursor position key to select the "COPY FILE"
function. Press cursor position key A to choose the drive from which the data (FILES) will be copied.
Use cursor position key B or C to select the desired files and cursor position key E to choose the hard
disk partition or floppy drive to which the data will be stored. Use cursor position keys H and E to
execute this command.

4. Function "NEXT SONG"

This function can be used to chain together several songs of the same partition in any order and play
them back one after another without a break.
NOTE: When you create a song chain, the command "Go to song XY" is added to the end of each
song (except for the last one).
If you want to play back a single song out of a song chain, you must press the STOP key at the end of
desired song. Otherwise the next song will be started.
Example: Song A and Song B will be played back in a song chain.
a) Use the numerical song selection method to check the number to which Song A is assigned.
b) DISK mode, page 1: select LOAD ALL SONG.
c) Press cursor position key B.
d) Use the VALUE dial or the DOWN/UP keys to select the song that will be used as Song A.
e) Use cursor position keys H and E to load Song A.
f) After you have pressed the SONG and PAGE+ keys, select page 11: UTILITY of the Song menu.
g) Enter the number of Song B into submenu "NEXT SONG" and use the VALUE dial or the
DOWN/UP keys to enable the AUTO START function above cursor position key H.
h) Use the "DELETE SONG" function on page 5: UTILITY of DISK mode to delete Song A from the
hard disk.
i) Select page 3: SAVE of DISK mode and save Song A to hard disk.