UNIVERGE SV8100
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Program Name
Number
14-05-01
Trunk Group – Trunk Group
Number
14-06-01
Trunk Group Routing – Priority
Order Number
Line Preference
Description/Comments
For Auto-Answer of Non-Ringing
Lines, assign trunks to trunk
groups. This is part of Trunk
Group Routing programming.
Set the priority order number
(1~4).
Assigned Data
1
Trunk Group Number:
0~100 Priority Number:
1~200 (default = Trunk
Group 1, with priority in
ascending order)
0 = Not Specify
1~100 : (Trunk Group
Number)
1001~1100 : (1000 +
Route Table Number)
Default:
Route 1, Order
Number 1 = 1 (Trunk
Group 1)
Order Numbers 2, 3, 4
= 0 (Not Specified)
All Other Routes
(2~100) and Order
Numbers (1~4) = 0
(Not Specified)
Issue 7.0
Level
2
3
2 - 855