Wifi; Network0/1 - Hitachi WirelessIP-5000 Interface Manual

WirelessIP-5000 Web Interface Manual

2.2.5 WiFi

Wireless roaming and power saving settings can be changed here.
[WiFi]
RoamingDetection Signal -79
PSAwakeTimeout
PSAwakeActTimeout
RoamWhenTxContError
RoamWhenRxContError
DisablePowerSave

2.2.6 NetWork0/1

Here you define TCP/IP and wireless settings. Outbound Proxy for this specific network is also defined
here:
[Network0]
SSID
Use DHCP
Address
Net Mask
Gateway
DNS1
Use WEP
WirelessIP-5000
Keison Products www.keison.co.uk
Default value Usable Characters
-103 to 0
50
400
10
10
0 0,1
(Figure 7)
Usable
Default value
Characters
NULL 33 bytes max
1 0,1
0.0.0.0 16 bytes max
255.255.255.0 16 bytes max
0.0.0.0 16 bytes max
0.0.0.0 16 bytes max
0 0,1
© Copyright2004, Hitachi Cable and ABP Technology, All rights reserved
sales@keison.co.uk
Description
Signal Level to start roaming (in dbm)
Used when Power Save is enabled
Used when Power Save is enabled
Error % to start roaming
Error % to start roaming
WLAN Power Save Enable(0) / Disable(1)
Description
SSID Value
DHCP Mode Enable(1)/Disable(0)
IP Address when DHCP Mode is disabled.
Net Mask when DHCP Mode is disabled.
Gateway when DHCP Mode is disabled.
DNS Server when DHCP Mode is disabled.
WEP Enable(1)/Disable(0)
Tel: +44 (0)1245 600560
- 7 -
Fax: +44 (0)1245 600030