The Front Panel - Cisco TelePresence System Codec C90 Manual

Cisco TelePresence System Codec C90
Contents

The front panel

There are four LED's in the front of the Codec:
•
Power – The POWER LED turns ON when power is
connected, otherwise OFF
•
Call – The CALL LED turns ON when there are active calls
on the codec, otherwise OFF
•
Infrared – The IR LED flashes when infrared signals are
received
•
Alarm – The ALARM LED turns ON when there is no
connection to the network, otherwise OFF
D14644.03 Codec C90 Physical Interface Guide TC4.1, February 2011.
© 2010-2011 Cisco Systems, Inc. All rights reserved.
Introduction Connecting to the codec
Power
The physical interface The physical interface
Call IR Alarm
(infrared)
8
Physical interface guide
Contact us
www.cisco.com