Initialization & Upgrade Methods - Samsung HT-Z410 Service Manual

Troubleshooting
4-3 Initialization & Upgrade Methods
4-3-1 MICOM Initialization & Update
MICOM Initial

In STANDBY condition, press "STOP" button of Main Unit 5 seconds more, STANDBY RED LED will go out and go
on. Then Initialization complete.
MICOM Update

1. At Bottom side of Main Unit, Connecting 6 pin cable.
2. Wire to Update connector-look like an oval hole then update
start.
 Required Equipment:
Computer, Rom Writer, Connecting Cable, Update Program.
 Update is available Only OTP type MICOM.
4-22
<Fig. 4-10 Connecting 6 Pin>
<Fig. 4-11 Connecting Rom writer>
<Fig. 4-12 Update Program>
Samsung Electronics