Table of Contents
Advertisement
Choose a shutter speed.
2
Select mode w and choose a shutter
speed as follows:
• Bulb: Rotate the main command dial
left until "Bulb" is selected for shutter
speed.
• Time: Rotate the main command dial
left until "Bulb" is selected for shutter
speed, and then press 4 (C) and
select a remote control mode (0 96).
Open the shutter.
3
Bulb: After focusing, press the shutter-release button all the
way down. Keep the shutter-release button pressed until the
exposure is complete.
Time: Press the ML-L3 shutter-release button all the way down.
The shutter will open immediately or after a two-second
delay.
Close the shutter.
4
Bulb: Take your finger off the shutter-release button.
Time: Press the ML-L3 shutter-release button all the way down.
Shooting ends automatically after about two minutes. Note that
some time may be required to record long exposures.
Main command dial
#
75
Advertisement
Table of Contents
