Sharp AH-A18LCA Operation Manual page 9

Operation of wireless remote control
Names and functions of wireless remote control
Notice: This is a general use remote controller, it could be used for various types of air
conditioners with multifunction . For some f unctions, which the model dosen't have,
if press the corresponding button on the remote controller that the unit will
original running status.
Remote control
BLOW
BLOW button
Press this button, can turn on or turn off
the drying function.In Cool and Dry mode,
press this button and will display "BLOW",
at this time the Blow function is turned on. If
repress this button,"BLOW" will be concealed,
at this time the Blow function is turned off.
After powered on, Blow OFF is defaulted.
When operating the ON/OFF button, or
switching mode to Cool or Dry mode, the
Blow function will keep the original status.
If unit is turned off, Blow OFF only can be
set up and send the signal. In Auto and
Fan mode, Blow function can not be set
up and there is no "BLOW" displaying.
-
- button
Presetting temperature can be decreased.
Press this button, the temperature can be
set up, continuously press this button
and hold for two seconds, the relative
contents can quickly change, until unhold
this button and send the order that the
o
( F) signal will be displayed all the time.
NOTE:
In Auto mode, the temperature can not be
setup, but operate this button can send
the signal.
+
For presetting temperature increasing.
Press this button,can set up the temperature,
when unit is on . Continuously press and
hold this button for more than 2 seconds,
the corresponding contents will be
changed rapidly, until unpress the button
then send the information,
displaying all along. Centigrade setting
range :16-30; Fahrenheit scale setting
range 61-86.
NOTE:
In Auto mode, the temperature can not be
setup, but operate this button can send the
signal.
TEMP
TEMP button
Press this button, can set up and select:
setting temperature (displaying the set
temperature in the room), indoor ambient
temperature ( displaying indoor
temperature) and circulate like this. No
signal is displayed.
Remark: When operating this button, the setting
temperature is displayed all the time on the
wireless remote control.
TURBO
TURBO button
In Cool mode, press this button can turn
on or turn off the Turbo function. After
turned on the Turbo function, its signal
will be displayed. When switching the
mode or changing fan speed, this function
will be cancell ed automatically.
6
keep the
is