Connection Diagrams - JVC GM-V42UB Instructions Manual

Connection Diagrams

Typical connections
Personal computer
(used as the playback source)
AUDIO
IN
External speaker connection
To speaker input terminals
How to connect the cords
Personal computer
(used to control the Monitor)
❊
MAKE
RS-232C
WIRED
RGB A REMOTE
Note:
It is recommended to use the speaker unit—TS-C421SPG (not supplied)
as the external speakers. You can also connect any speakers of the
following specifications:
• Impedance: Between 6 Ω and 8 Ω
• Power handling capacity: More than 3 W
Caution:
• Do not short-circuit the 9 and ( speaker cords each other. (Refer
also to the instructions supplied with the speaker unit when
connecting speakers.)
Remote control
(supplied)
MENU/EXIT
VOLUME MUTING
A RGB B
VIDEO
B) /(RGB A
COMPO.
SELECT INPUT
ASPECT DISPLAY
ON POWER OFF
UNIT CONTROL REMOTE RM–C579
Cable with stereo
mini jacks
(not supplied)
Ferrite core
• Make sure to attach the ferrite core to
OUT
L
R
AUDIO AC IN
ª
·
·
ª
When using external speakers,
set this to EXTERNAL.
❊
For connection, see page 13.
Amplifier, etc.
Power cord
(supplied)
To a wall outlet
(supplied to GM-V42UG)
the power cord. See also page 8.
POWER
External speakers
(Ex. TS-C421SPG)
To speaker input terminals
11