Editing And Processing Images; Changing The Image Size - Ricoh KS1 Operation Manual

u Caution
• The camera cannot be operated while it is connected to
a computer. To operate the camera, terminate the USB
connection on the computer, then turn off the camera
and remove the USB cable.
• If the "PENTAX K-S1" dialog appears on the computer screen
in Step 5, select [Open folder to view files] and click the
OK button.
t Memo
• Refer to "Operating Environment for USB Connection and
Provided Software" (p.104) for system requirements to
4
connect the camera to a computer and to use the software.
• The USB connection mode when connecting the camera to
a computer can be set in [USB Connection] of the D2 menu.
Normally, you do not need to change the default setting
([MSC]).
70

Editing and Processing Images

Changing the Image Size

u Caution
• Only JPEG images captured with this camera can be resized
or cropped.
• Images already resized or cropped to the minimum file size
cannot be processed.
Changing the Number of Recorded Pixels (Resize)
Changes the number of recorded pixels of the selected image,
and saves it as a new file.
1
Display the image to edit in single image display.
2
Select d in the playback mode palette.
The screen to select the number of recorded pixels
appears.
3
Use CD to select the
number of recorded pixels
and press E.
You can select an image size
smaller than that of the original
image.
The save confirmation screen appears.
4
Select [Save] and press E.
Cancel Cancel OK OK