COLOUR TELEVISION Contents AV-21V115 Knowing your TV’s features ... 2 Remote control buttons and basic functions . 3 TV buttons and functions ... 5 Setting up your TV ... 6 Basic setting for picture ... 8 Advanced setting for picture ... 9 Advanced setting for sound ...
4 Do not allow objects or liquid into the cabinet openings. 5 In the event of a fault, unplug the unit and call a JVC service technician. Do not attempt to repair it yourself or remove the rear cover. 6 The surface of the TV screen is easily damaged. Be very careful with it when handling the TV.
Remote control buttons and basic functions No. Press POWER Turn on or off the TV from standby mode. MENU/OK Display menu and confirm selected function. 5/∞/2/3 Select and adjust menu function. CHANNEL M Select the desired channel number. VOLUME M Adjust the volume level.
Page 4
Remote control buttons and basic functions (continued) How to operate menus and menu locations Press the MENU/OK button 2. Display the MENU. Display the top menu. Press 5/∞ buttons 3 to choose a menu title. Then press MENU/OK button 2. Display the 2nd menu.
TV buttons and functions Front of the TV AV-21V115 GG30068-002A Rear of the TV AV-21V115 No. Button/terminal Description I (main power) Press to turn on or turn off the TV’s main power. Power lamp Indicate the TV is being turned on or off.
• Use AA/R6/UM-3 dry cell batteries. • If the remote control does not work properly, fit new batteries. The supplied batteries are for testing, not regular use. 4 Turn on the TV by pressing the main power button. JVC logo appears on the screen.
Page 7
• If the JVC logo does not appear, use LANGUAGE and AUTO PROGRAM functions to make the initial settings. Those functions are located in the INSTALL menu. • If the JVC logo appears, although you had made the initial settings, press the TV/VIDEO button to exit from initial settings. AUTO PROGRAM...
Basic setting for picture COLOUR SYSTEM You can select the appropriate colour system when the picture is not clear or no colour appears. Press the COLOUR SYSTEM button to select a setting. In TV mode: AUTO In VIDEO mode: AUTO NTSC4.43 NTSC3.58 To operate this function with a menu:...
Advance setting for picture BLUE BACK You can set the TV to automatically change to a blue screen and mute the sound if the signal is weak or absent, or when there is no input from an antenna. Select the BLUE BACK in the INSTALL menu, then choose ON or OFF.
Favorite channel and video setting To register the favorite channel You can register and recall 4 favorite channels by using the colour buttons (red, green, yellow, blue). 1 In TV mode, select a TV channel (PR 01-99) you desired to register. 2 Press and hold a colour button for 3 seconds or more.
Customized setting You can reduce the picture noise. Select the VNR in the PICTURE FEATURES menu under PICTURE menu, then choose a setting of VNR function. ❇ MENU PICTURE PICTURE FEATURES VNR is turned off. AUTO Effect of VNR is automatically controlled. Effect of VNR becomes minimum level.
TV channel presetting To register the TV channels auto- matically You can register the TV channels into the TV’s channel list automatically. 1 Display the INSTALL menu. ❇ MENU INSTALL 2 Choose AUTO PROGRAM, then press the MENU/OK button. AUTO PROGRAM function starts, and the channels received are registered in the channel list (PR list) automatically.
Page 13
TV channel presetting (continued) To add in the new channel (INSERT in the EDIT menu) You can add in the new channel in the TV channel list as you like. You need to find the “CH/CC” number for the TV channel.
Additional preparation Before connecting • Read the manuals provided with the devices for the proper connection. • Turn off all the devices including the TV. • Note that connecting cables are not supplied. Troubleshooting If a problem occurs when you are using the TV, check the following troubleshooting guide before calling for repair.