Software Overview..........5 Windows Driver......................5 Functionality ......................6 Windows Driver API & Other Software ..............7 Installation ............7 Files copied to your system ..................8 Quick Start ............9 Windows Movie Maker .....................9 Ncast Screen Snatcher ....................9 Technical Support........... 10 Page 2 of 10...
Introduction The NCast Digitizer Capture Card functions as an analog RGB and video capture device. The Digitizer card is primarily designed for applications requiring high resolution and high frame rates. Example applications include webcasting over IP, local capture, remote viewing, and replacing dedicated monitors.
Please reference the table below for a list of supported input resolutions: Resolution Frequency 640x350 70Hz 640x400 56Hz 640x480 66Hz (MAC) 640x480 60, 72, 70, 75, 85Hz 720x400 70, 85Hz, (text modes) 800x600, 56, 60, 72, 75, 85Hz 832x624 75Hz 60, 70, 75, 85Hz 1024x768 All following resolutions are scaled down to 1024x768...
Software Overview Windows Driver The Digitizer can be installed by downloading the Windows driver from the NCast website. Once the driver has been downloaded, double click on the .zip icon and follow the installation instructions as prompted later in this section.
2000 Kernel Streaming Model, and therefore the Digitizer Capture Card can be used with all Windows video capture programs. The Digitizer Capture Card and driver has been tested with the following capture programs: • Windows Media Encoder • Real Producer •...
Two sample programs are also available for download, the NCast Screen Snatcher and the NCast Digitizer Control. The NCast Screen Snatcher program displays a loopback picture from the card. The NCast Digitizer Control program is an application that demonstrates how to switch and check input from the outside of a running video capture program.
Hardware” wizard asks you to connect to Windows Update to download new software, select: "No, not this time". Installation wizard will warn you, that the driver for "Ncast Digitizer" does not have windows certificate. Choose "Continue anyway" and proceed with the installation.
1. Launch "Windows Movie Maker", which is a standard windows program. 2. Choose "File / Capture from device". 3. Then choose "Ncast Capture" as capturing device . 4. Do not continue with capturing, choose "Configure" 5. Choose configure 'camera settings', to see "Digitizer's Custom Properties.”...
Technical Support Customers can access support documentation at www.ncast.com. Also, users can send an e-mail to info@ncast.com with as much information as your reference system as possible. Also, feel free to contact us appropriately below: NCast Corporation 155A Moffett Park Drive...