Natural Cinema; Position Adjustment - JVC 0107TNH-II-IM User Manual

Picture Adjust

Natural Cinema

Natural cinema corrects the problem of blurred edges which may occur when viewing a program
originally shot on film (such as motion pictures) or animation. If you notice blurring at the edges
of these programs, choose "Natural Cinema" and set it to "Auto". Natural Cinema helps correct
conversion errors that occur when film, which is shot at 24 frames-per-second, is broadcast at the
television rate of 30 frames-per-second.
Press the M
To "Picture Adjust"
π †
è
To enter
To "Natural Cinema"
π †
è
To enter
To select the mode "Auto" or "Off"
π †
Press the M
Note:
• Natural Cinema is only applied for SD 480i signal.

Position Adjustment

Position adjustment allows you to adjust the position of the picture.
Press the M
To "Picture Adjust"
π †
è
To enter
To "Position Adjustment"
π †
è
To enter
To adjust the position
π †
Press the M
Notes:
• To reset the adjustment to the center, press the O
• When the arrow disappears, while you are adjusting the position, the position is at it's
maximum limit.
• If you select Regular, Slim or Full size with aspect, position adjustment option is not seen.
• When you change the screen size, perform the position adjustment again.
• Position adjustment allows you to adjust the screen position vertically when the aspect is set
Panorama Zoom or Cinema Zoom for 1080i and 720p signals.
48
button
ENU
button when finished
ENU
button
ENU
button to finish
ENU
Operate
button.
K
Natural Cinema
Auto
Off
OK BACK MENU
Reset Back Exit