Enhancements; Configuration - Nokia 6086 User Manual

S e t t i n g s

■ Enhancements

This menu is shown only if the phone is or has been connected to a compatible
mobile enhancement, other than the charger.
Select Menu > Settings > Enhance-ments. You can select an enhancement menu
if the corresponding enhancement is or has been connected to the phone.
Depending on the enhancement, select from one of the following options:
Default profile — to select the profile that you want to be automatically activated
when you connect to the selected enhancement.
Automatic answer — to set the phone to answer an incoming call automatically
after five seconds. If Incoming call alert
answer is off.
Lights — to set the lights permanently On. Select
for 15 seconds after a keypress.
Ignition detector > On — to automatically switch off the phone approximately 20
seconds after you switch off the car ignition, when the phone is connected to the
full car kit.
TTY/TDD > Use TTY > Yes — to use text phone settings instead of headset settings.

■ Configuration

You can configure your phone with settings that are required for certain services
to function correctly. The services are multimedia messaging, instant messaging,
synchronization, e-mail application, streaming, push to talk, and browser. Your
service provider may also send you these settings as a configuration message.
To save the configuration settings received as a configuration message, see
"Configuration settings service," p. 10.
Select Menu > Settings > Configura-tion
Default configu- ration settings
phone. Scroll to a service provider, and select
that the configuration settings of this service provider supports. To set the
configuration settings of the service provider as default settings, select
Options > Set as default. To delete configuration settings, select Delete.
Activate default in all applications
settings for supported applications.
64
is set to Beep once or Off, automatic
Automatic to set the lights on
and one of the following options:
— to view the service providers saved in the
Details to view the applications
— to activate the default configuration