Summary of Contents for TAG Heuer DOCKING GPS – GSM
-
Page 1: User Manual
______________________________ P R O F E S S I O N A L T I M I N G DOCKING GPS – GSM User Manual Version 07/2012... - Page 2 1. General The GPS Docking is equipped with a Li-Ion accumulator ensuring exceptional autonomy for the Chronoprinter 540, even at very low temperatures (-20°C / -4° F). A satellite detection module « GPS » ensures the automatic Time of Day synchronization and precision control.
-
Page 3: Important Recommendation
2. Important recommendation To guarantee the security of your timekeeping, it is necessary to use your CP 540 with the internal batteries in a charged state Do not forget to charge the Docking before its use (see « How to charge the Docking ») ... - Page 4 4. How to Use GPS Carefully connect the GPS antenna cable in the socket (21). The GPS antenna must be installed in a clear open place (outdoor) with an unobstructed view of the sky in order to correctly receive the satellite signals generated by the GPS system. ...
- Page 5 5. Remarks on GPS ► If GPS signal is Lost (poor positioning of the antenna), the printer indicates: Synchro GPS lost The time of day The display time of day will flicker along with LOST. If the GPS signal is synchronized again, the printer indicates (repositioning of the antenna) GPS Active Synchro GPS found Time of the day...
-
Page 6: Software Setup
6. How to use the GPRS transmission ATTENTION The SIM Card should not have PIN number. Please disable any SIM PINs via your SIM provider instructions 6.1. Software Setup In order to set all connection information into your device. Connect your Chronoprinter 540 on your laptop and fire up the software: GPRS_settings.exe Select the COM Port attribuated by your computer. - Page 7 Germany 2) The Server: If you use the GPRS Server provided by TAG Heuer Professional Timing, the following settings won’t change: Please contact use on info tagheuer-timing.com if you need a new account. 3) SIM Balance code: It’s the Prepaid internet Data sim balance check.
- Page 8 6.2. GPRS Computer interface Fire up “GPRS Interface_vx.x.x.exe” This Software should run on the background (local machine) as the Timing Software. Software ID Number: Computer ID set on the server Server Address: gprstiming.com Server Port: 13000 User name and Password: Your personal account ID 6.3.
- Page 9 How to insert the SIM Card in the Docking Use a Standard SIM Card (annual subscription) or with pre-payment. To guarantee a bidirectional communication between CP 540’s, it is necessary to have two GSM Docking stations, with SIM cards with a different telephone number. Proceed to the following steps: Unscrew the 5 screws on the back of the Docking with a Phillips screwdriver N°...
- Page 10 7. Information The GSM – GPS Docking has « banana » output connector to provide a signal TOP-MINUTE which is useful to synchronize other timing systems. If the GPS is used only for the CP 540, it is recommended to wait 4 – 5 mins before to switching it OFF («...
- Page 11 8. How to charge the Docking accumulator The Docking can be charged seperately or connected to a CP 540. Charge the docking with the power supply HL 540-1 from the CP 540 Connect the power supply to the POWER connector of the Docking (connector 3 poles). ...
-
Page 12: Technical Specification
9. Technical specification General Operating condition -20°C to +60°C External power supply 12Vdc Top minute output (optocoupler) Connector IN / OUT for Master / Slave (2 x RJ13) Accumulator Type 7.4V Li-Po 2700mAh Charging condition 0° to +40°C Charging current 500mA (~5.5 hours) Precision +/- 50 n seconds (+/- 50 x 10-9 sec) - Page 13 TAG Heuer PROFESSIONAL TIMING 6A Louis-Joseph Chevrolet 2300 la Chaux-de-Fonds Switzerland Tel : 032 919 8000 Fax : 032 919 9026 E-mail: info@tagheuer-timing.com Http: //www.tagheuer-timing.com...