Menu Screen - JVC HI-FI HR-J642U Instructions Manual

1 2
3
4 5 6
7 8 9
0
CH
1 3 ¡
8
¶ 7
8
2 2
q 5/8 6
9
10
MENU
OK
11
12
13
NOTE:
If you use a cable box or a DBS receiver connected to one of
the VCR's auxiliary input connectors, be sure to select again the
required input at the AUX Input screen when you finish editing.
RETURN TO FUNCTION
SET SCREEN
Press MENU.
ACCESS AUX INPUT
SCREEN
Press CH 5 ∞ to move the highlight bar (arrow) to "AUX
INPUT", then press OK.
SELECT INPUT
If you are connecting the
AV cable to the AV
connectors on the front of
the VCR , move the
highlight bar (arrow) to
"FRONT" by pressing
CH 5 ∞. If you are
connecting the AV cable to
the AV connectors on the
back of the VCR , place the arrow next to "REAR" by
pressing CH 5 ∞.
RETURN TO NORMAL
SCREEN
Press MENU as many times as necessary.
START PLAYER
Set the camcorder to its play mode.
NOTE:
If the camcorder is equipped with a superimpose/OSD
disable feature then set its superimpose or display
feature to OFF before pressing play.
START RECORDER
Set your VCR to its record mode.
If you are using a Master Edit Control-equipped JVC
camcorder, it can put the recorder automatically into
Record mode. (Refer to camcorder's instruction
manual.)
37
EN
AUX INPUT
= FRONT
REAR
PRESS (5,∞) TO SELECT
PRESS (MENU) TO END