JVC LPT1092-001A Instructions Manual page 59

Advanced Playback (VHS)
Turn on the unit.
Turn on the TV and select the AV mode.
Slide the TV/DVD switch to DVD.
Press VHS so that the VHS lamp lights up on the unit.
VHS
Clean the video heads using a dry cleaning cassette when:
Rough, poor picture appears while a tape is played back.
The picture is unclear or no picture appears.
"USE CLEANING CASSETTE" appears on the screen (only with
"SUPERIMPOSE" set to "AUTO"). (
NOTE:
The heads get dirty in the following cases:
in an environment prone to extreme temperature or humidity
in a dusty environment
flaw, dirt or mold on video tapes
continuous usage for a long time
ATTENTION:
In the search, still, slow-motion or frame-by-frame playback mode,
the picture will be distorted.
the noise bars will appear.
there may be a loss of colour.
you cannot hear the sound.
Still Picture/Frame-By-Frame Playback
1
Press 9 to pause during playback.
If there is vertical jitter, press PR +/– to correct the picture.
2
Press 9 repeatedly to activate frame-by-frame playback.
To resume normal playback, press 4.
Slow Motion
1
Press 9 to pause during playback.
2
Press and hold 9 for 2 seconds, then release. Press 9 and
release again to return to still picture.
The speed changes for each direction by pressing 3 and 5
repeatedly.
To resume normal playback, press 4.
NOTE:
During slow motion playback, some noise may appear on the TV
screen. Press PR + or – to eliminate the noises.
PR +/–
pg. 79)
High-Speed Search
During playback, press 5 for forward high-speed search, or 3
for reverse high-speed search.
Each press of the button increases the search speed for each
direction.
When pressing 5:
(SP): +5x{+7x
(LP): +11x{+21x
When pressing 3:
Once 3 is pressed, reverse search starts in –1x normal playback
speed. After this process, each press of 3 changes the search
speed between –5x and –7x in SP mode, –11x and –21x in LP mode.
(SP): –1x]–5x{–7x
(LP): –1x]–11x{–21x
To resume normal playback, press 4.
Quick Rewind A Little
During playback, press
(about 7 seconds) and resumes playback.
If the button is pressed repeatedly, the unit rewinds the pictures
continuously and resumes playback.
Skip Search
During playback, press
sections.
Each press initiates an approximately 30-second period of fast-
motion playback. Normal playback resumes automatically.
To resume normal playback, press 4.
Index Search
Your unit automatically marks index codes at the beginning of each
recording. This function gives you quick access to any one of the 9
index codes in either direction.
NOTE:
Before starting, make sure the unit is in the Stop mode.
Press 2 or 6 to activate Index Search. "2 1" or "6 1" is
displayed on the TV screen and search begins in the corresponding
direction.
To access index codes 2 through 9, press 2 or 6 repeatedly
until the correct index number is displayed.
Example:
To locate the beginning of B from the current position, press 2
twice.
To locate the beginning of D from the current position, press 6
once.
Current position
When the specified index code is located, playback begins
automatically.
ADVANCED PLAYBACK
. The unit rewinds the picture a little
1 to 6 times to skip over unwanted
Index number
59
EN