Change Your Router's Password; Change Your Router's Ssid (Name Of The Hotspot The End-User Will See); Add Devices To The Whitelist To Bypass Hotspot Authentication - D-Link DIR615 Installation Manual

Chillifire Hotspot Router Installation Guide Version 09.07
Change your router's password
Go to System->Status
Enter the new password
(twice identical)
Press 'Save Settings'
The system will prompt you
to enter the user name
'admin' and the new
password to continue.
Change your router's SSID (name of the hotspot the end­user will see)
Go to Network->Wireless
Change the SSID to any
value you like. Allowed
characters are large and
small letters [A...Z], [a...z],
[numbers [1...9],
underscores and dashes
[_-]. Please do use not any
other characters, as this
could cause issues.
We recommend leaving all
other settings as is, unless
you really know what you
are doing. To change
channels, please see point 2 below.
Press the 'Save Settings' button and confirm your settings by pressing 'Apply Settings'
Add devices to the Whitelist to bypass hotspot authentication
Devices that have been put on the whitelist will
bypass the login procedure completely and have
straight and unlimited access to the internet. The
devices that are on the whitelist are defined by their
MAC Address, which can be entered on the Chillifire
Configuration Screen.
Note: The MAC address can be found on the bottom
of the Chillifire login screen.
Just enter the MAC address in the field and press
'Add Allowed Device' button. Confirm your settings
by pressing 'Apply Settings'.
To remove a device press the 'remove it' link next
to it.