Brinkmann 3420 Owner's Manual page 26

Step 9
To install the wheels, insert wheel
assembly through the right rear
and front cart legs as illustrated.
Insert cotter pins to secure
Step 10
Attach the tank retention support
bracket in between right front
and rear cart legs using the two
M6 X 20 mm bolts as illustrated.
Remove the pre-attached carriage
bolt and wing nut from the tank
retention support bracket. Attach
the tank retention bracket to the
tank retention support bracket with
carriage bolt and wing nut as
shown.
25
Cotter Pin
Wheel
Assembly
Tank Retention
Support Bracket
Carriage Bolt
Bolts
Wing Nut
Tank
Retention
Bracket