Zero Return Function; Video Index Search System; Recording - JVC 2B00401C User Manual

ZERO RETURN function / Video Index Search system

ZERO RETURN function

This function makes tape-rewinding
stop at the counter 00:00:00 position
automatically.
MARKER RETURN
DVD MENU
DISPLAY A.TRK C.RESET
SUB TITLE ANGLE
SP/EP
PLAY
ZOOM TITLE
MODE
0
TIMER TV/VCR
PLAY
STOP
SKIP
/INDEX
ENTER/
SET
SELECT
SET UP
MENU
NOTES for Counter Display:
•
If you rewind the tape beyond "00:00:00",
a minus sign ("–") will be displayed in
front of the time counter.
• When you load a tape, the counter will
reset to "00:00:00".
•
The counter does not function on
nonrecorded (blank) sections of the
tape. When you rewind, fast forward or
play tapes through blank sections, the
counter stops.
NOTES for Video Index Search system:
•
When you record an INDEX mark at
the very beginning of the tape, the
mark may not be found.
•
During INDEX search, the tape may
stop and begin to play at a slightly
different location.
•
INDEX may not function properly with
old or worn out video tapes.
• INDEX marks may not be found if it is
extremely close to the point where the
search began.
•
In recording, if you stop recording
temporarily, the INDEX mark is not
recorded on the tape.
Preparation:
•
•
1
OPEN/
CLOSE
ZERO RETURN
SEARCH
MODE
REPEAT
A-B
TV
POWER
2
INPUT
TV VOL
3
SKIP
/INDEX
The DISPLAY-button
SET
Press DISPLAY. The clock and tape counter
alternate with each other in the display.
CANCEL

Video Index Search system

This function enables you to locate the beginning of any
recording made on the VCR.
Recording an INDEX MARK
The Index Search function automatically
records an INDEX mark on the tape
whenever a recording is initiated.
Index Search
Press INDEX
mode.
For Succeeding programs: Press INDEX
For Preceding programs: Press INDEX
(Additional press increases the INDEX NO.
up to 9.)
When the INDEX
unit starts searching the INDEX NO.
selected and finds the portion, then
playback starts automatically.
To stop the Index Search, press STOP.
Turn ON the TV and set it to the video input mode.
Make sure TV/VCR/DVD switch has been slided to VCR/DVD.
Then press VCR to select the VCR mode. (The VCR indicator
will light.)
Press OSD.
The counter display shows the tape
running time during playback or

recording.

Press C. RESET at the desired tape po-
sition. The counter display will be reset
to the "00:00:00" position (e.g. the
begining of recording).
Press STOP when playback or recording is finished.
Press ZERO RETURN.
The tape will be rewinded or fast forwarded and automatically
stop at the "00:00:00" position.
or during stop or play
or
8 : 47
STEREO SAP
VCR
8 : 47
STEREO SAP
VCR
INDEX
.
.
is pressed, the
or
INDEX NO. (up to 9)
MON CH 001
AM
00 : 04 : 38 SP
MON CH 001
AM
00 : 00 : 00 SP
VCR
VCR
CH 001
+3
is displayed
27