Advertisement
Quick Links
ELED FRESNEL II
User Instructions
Rev. 3/11
Elation Professional
©
www.elationlighting.com
ELED Fresnel II
Unpacking:
Thank you for purchasing the ELED Fresnel II by Ela-
tion Professional
. Every ELED Fresnel II has been thoroughly tested
®
and has been shipped in perfect operating condition. Carefully check
the shipping carton for damage that may have occurred during ship-
ture for any damage and be sure all accessories necessary to operate
the unit has arrived intact. In the case damage has been found or parts
are missing, please contact our customer support number for further
ing customer support.
Introduction:
The ELED Fresnel II is part of Elation Professionals
tures. The ELED Fresnel II is a powerful DMX intelligent LED spot. The
unit can be controlled manually or via DMX controller.
Customer Support:
provide set up help and to answer any question should you encounter
problems during your set up or initial operation. You may also visit us
on the web at www.elationlighting.com for any comments or sugges-
tions. Service Hours are Monday through Friday 9:00 a.m. to 5:00 p.m.
Voice:
E-mail:
Warning!
There are no user serviceable parts inside this unit. Do not
Caution!
attempt any repairs yourself, doing so will void your manufactures war-
ranty. In the unlikely event your unit may require service please contact
Elation customer support.
©
PLEASE recycle the shipping carton when ever possible.
®
Elation Professional - www.elationlighting.com - ELED Fresnel II Instruction Manual Page 2
Elation
provides a customer support line, to
®
©
(323) 582-3322
support@elationlighting.com
Introduction
-
-
®
-
Advertisement
Summary of Contents for Elation ELED FRESNEL II
- Page 1 Introduction: The ELED Fresnel II is part of Elation Professionals ® tures. The ELED Fresnel II is a powerful DMX intelligent LED spot. The unit can be controlled manually or via DMX controller. Customer Support: Elation provides a customer support line, to ®...
- Page 2 ELED Fresnel II Warranty Registration The ELED Fresnel II carries a two year limited warranty. Please fill out doors voids all warranties. service items whether under warranty or not, must be freight pre-paid be walked on or pinched by items placed upon or against them, written down on a piece of paper included in the shipping carton.
-
Page 3: Power Supply
Data Compliment (- signal) Pin 2 Pin 2 Pin 3 Pin 3 and cannot be split. Elation Professional - www.elationlighting.com - ELED Fresnel II Instruction Manual Page 5 Elation Professional - www.elationlighting.com - ELED Fresnel II Instruction Manual Page 6... -
Page 4: Led Display
The Output Setting will set the output wattage level for manual control and DMX dimming output. Elation Professional - www.elationlighting.com - ELED Fresnel II Instruction Manual Page 7 Elation Professional - www.elationlighting.com - ELED Fresnel II Instruction Manual Page 8... - Page 5 Listed below are a few common problems the user may encounter, with solutions. Unit not responding to DMX: see page 7 for the Output Setting Mode. and outputs are connected. Unit is not outputting 150W in DMX Mode: Elation Professional - www.elationlighting.com - ELED Fresnel II Instruction Manual Page 9...
-
Page 6: Warranty
United States of America, including place of purchase by acceptable evidence, at the time service is sought. B. For warranty service, send the product only to the Elation Professionals factory. ®...