LG 32LC7D Service Manual page 11

* Before AV ADC Calibration, should be executed the "Tool option 1"
5. Select method of Tool option 1
1) Press ADJ Key in the Adjust remote control.
2) Select "Tool option 1" by using
A
(ENTER).
3)Select "Maker" by using
module maker and. applied module classification by using
F G
/ (VOL+/-).
4) Select "Inch" by using
module according to the inch of model.
5) Select "Tool" by using
tool name according to the model.
(Inch of model : 26", 32", 37", 42", Applied module under the
classification)
0
64
2
66
4
68
8
72
12
76
D E
/ (CH+/-) key, and press
D E
/ (CH+/-) key, and change the
D E
/ (CH+/-) key, and change the
D E
/ (CH+/-) key, and change the
Creatore Pollice Attrezzo
LPL 26 LD4D
LD7D
CMO LD4D
LD7D
LPL 32 LD4D
LD7D
LPL 37 LD4D
LD7D
LPL 42 LD4D
LD7D
6. ADC Calibration
ADC RF/AV/S-VIDEO
MSPG925F PALJ
INPUT SELECT
Model: 202 (PAL-BGDHI) 720P/50Hz
Pattern: 65
PAL 7 Color Bar
<Caution>
- System control RS-232 Host should be "PC" for adjustment.
- Before AV ADC Calibration, execute the "Module selection".
6.1. Adjustment of RF/AV/S-VIDEO
(1) Required Equipments
- Remote controller for adjustment
- MSPG-925FS Pattern Generator (Which has Video
Signal: 7 Color Bar Pattern shown in Fig. 1)
=> Model: 202 / Pattern: 65
(2) Method of Auto RF/AV/S-VIDEO Color Balance.
1) Input the Video Signal: 7 Color Bar signal into AV3.
2) Set the PSM to Dynamic mode in the Picture menu.
3) Press IN-START key on R/C for adjustment.
4) Press the G
becomes automatically.
5) Auto-RGB OK means the adjustment is completed.
6.2 Adjustment of Component.
(1) Required Equipments
- Remote controller for adjustment
- MSPG-925FS Pattern Generator (Which has 720p/60Hz
YPbPr output Pattern shown in Fig. 1 )
=> Model:215/Pattern: 65
(2) Method of Auto Component Color Balance
1) Input the Component 720p/50Hz 7 Color Bar(MSPG-
925FS model:215, pattern:65) signal into Component.
2) Set the PSM to Dynamic mode in the Picture menu
3) Press the IN-START key on R/C for adjustment.
G
4) Press the
becomes automatically.
5) Auto-RGB OK means the adjustment is completed.
- 11 -
Component
Model:215 (720P) Model: 3
AV3 Pattern:65
7 Color Bar
<Fig. 1>
(Vol.+) key to operate the set, then it
(Vol.+) key to operate the set , then it
RGB-PC
(1024*768 60Hz)
Pattern: 65