Yamaha XV19SW Service Manual page 109

L LLL L LLL L L LLL L L LLL L
3. Check:
• EXUP cable free play (at the EXUP valve pul-
ley) "a" and "b"
EXUP cable free play (at the
EXUP valve pulley)
a: 3 mm (0.12 in) or less
b: 3 mm (0.12 in) or less
b
a
4. Adjust:
• EXUP cable free play
M MMM M MMM M M MMM M M MMM M
a. Loosen both locknuts "1".
1
b. Turn both adjusting bolts "2" in or out until the
specification.
Turn in "a" →
Free play is increased.
Turn out "b" →
Free play is decreased.
b
a
c
L LLL L L LLL L LLL
M MMM M M MMM M MMM
3-19
b
a
b
a
2
c. Tighten both locknuts.
d. Turn the main switch to "ON" and check that
the projection "c" on the EXUP valve pulley
contacts the stoppers (fully open and fully
closed positions), then stops between the
lines "d" on the cable holder.
d
L LLL L LLL L L LLL L L LLL L
5. Install:
• EXUP valve pulley cover
EXUP valve pulley cover bolt
7 Nm (0.7 m·kg, 5.1 ft·lb)
ENGINE
2
c
L LLL L L LLL L LLL