Add Code Id Prefix To All Symbologies; Function Code Transmit - Honeywell 3820 Quick Start Manual

Add Code ID Prefix to all Symbologies

Scan the following bar code if you wish to add a Code ID prefix to all
symbologies at once.
Add Code ID Prefix to all Symbologies
(Temporary)
Note: For complete list of Code IDs, see the User's Guide for your
product at our website, www.honeywellaidc.com.

Function Code Transmit

When this selection is enabled and function codes are contained
within the scanned data, the imager transmits the function code to the
terminal. Charts of these function codes are provided in your User's
Guide. When the imager is in keyboard wedge mode, the scan code
is converted to a key code before it is transmitted.
Enable
(Default)
Disable