Table of Contents
Advertisement
Before you start
Initial settings
Run Calibration (recommended)
Calibration ensures accurate weight detection by the washing machine. Make sure the drum is
empty before running Calibration.
1. Press the Power button to turn on the washing machine.
2. Press and hold the Temp. and Delay End buttons simultaneously for more than 3 seconds.
The washing machine enters the Calibration mode with a message of "Cb" on the display.
3. Press the Start/Pause button to start Calibration.
•
The door will be locked during the operation.
•
The drum keeps rotating clockwise and anticlockwise for several minutes.
4. When complete, the door lock is released with a message of "End" on the display, and the
washing machine turns off automatically.
Untitled-5 18
English - 18
2014-02-06
7:04:12
Advertisement
Table of Contents
