Function Description - ViewSonic PJD5123p User Manual

Function
Pre-defined picture modes are provided so you can optimize your
Color Mode
projector image set-up to suit your program type. See
picture mode" on page 33
Selects a picture mode that most suits your need for the image
Reference
quality and further fine-tune the image based on the selections
listed on the same page below. See
Mode
mode" on page 34
Adjusts the brightness of the image. See
Brightness
page 35
Adjusts the degree of difference between dark and light in the
Contrast
image. See
Adjusts the color saturation level -- the amount of each color in a
Color
video image. See
Adjusts the red and green color tones of the image. See
Tint" on page 35
Tint
Adjusts the image to make it look sharper or softer. See
Sharpness
Sharpness" on page 35
Brilliant
Adjusts white peaking while maintaining correct color presentation.
See
Color
Color
See
Temperature
Save
Saves the settings made for the User 1 or User 2 mode.
Settings
Quick Auto
See
Search
Color Space
See
Conversion
Allows the projector to decrease the power consumption
Smart Eco
automatically if no input signal is detected after a set period of time.
Timer
Selecting On enables you to restart the projector immediately
Smart
within 150 seconds after turning it off.
Restart
The projector can display several test patterns. It helps you adjust
Pattern
the image size and focus and check that the projected image is free
from distortion.
My Button
Sets a hotkey on remote control.
Description
for details.
for details.
for details.
"Adjusting Contrast" on page 35
"Adjusting Color" on page 35
for details.
The function is only available when Video or S-Video with
NTSC system is selected.
for details.
"Adjusting Brilliant Color" on page 35
"Selecting a Color Temperature" on page 35
"Switching input signal" on page 28
"Changing Color Space" on page 28
It takes the projector several minutes after it is turned on or
resumed to initiate the function.
It takes the projector several minutes after it is turned on or
resumed to initiate the function.
51
"Selecting a
"Setting the User 1/User 2
"Adjusting Brightness" on
for details.
for details.
"Adjusting
"Adjusting
for details.
for details.
for details.
for details.