NETGEAR DGFV338 ProSafe Reference Manual page 54

DGFV338 ProSafe Wireless ADSL Modem VPN Firewall Router Reference Manual
To Program the Traffic Meter (if desired):
1. Select Monitoring from the main menu and Traffic Meter from the submenu. The default
ADSL screen shown in
2. Fill in the fields from the descriptions in
3. Click Apply to save your settings.
4. Click Traffic by Protocol to view the traffic details for each interface.
You can also choose to monitor both interfaces since the configuration is specific to each
connected WAN interface.
5. Click Apply to save your settings.
6. Select the WAN Ethernet Traffic Meter tab and repeat the process to program the WAN
Ethernet Traffic Meter (if applicable).
7. Click Apply to save your settings.
2-24
Figure 2-12 will display.
Table
v1.0, May 2008
2-2.
Basic Installation and Configuration