Touch Driver Installation - NEC V463-TM Installation Manual

V463-TM Installation Guide
46" LCD Display
Ventilation Recommendations (all models)
Dimensions below are minimum recommended for proper ventilation.
NOTE:

The ventilation space should not be covered or closed off at the front of the opening. If for some reason the opening needs to be
covered, other means of ventilation will need to be incorporated into the design. Contact NEC for design review and
recommendations.

Touch Driver installation

In order for the touchscreen to properly work, the source computer needs to be connected to the
o
display via provided USB A to B cable. This connection on the screen is on the upper back right
side. See image to the right.
When plugging in the USB A to B cable from a Windows 7 or XP source computer to
o
V463-TM, touch screen should react and act as a HID device,
automatically downloading all touch driver information.
USB plug-in is located on the upper portion of the left side of the display.
o
www.necdisplay.com
NEC Display Solutions of America, Inc.
V463-TM
Rev 1.0
Page 2 of 10