JVC Exad KD-ADV38 Instructions Manual page 360

Menu items
IF Band Width
AV Input
External Input*
Beep
Telephone Muting*
Initialize
* 8
Reverse lamp lead connection is required. See Installation/Connection Manual (separate volume). The rear view
through the camera appears on the monitor in "Full" aspect ratio (regardless of the aspect ratio setting) when you
shift the gear to the reverse (R) position.
* 9
Not selectable when the component connected to the CD changer jack is selected as the source.
* 10
The name of the component detected through the CD changer jack is shown.
* 11
The TEL MUTING lead connection is required. See Installation/Connection Manual (separate volume).
Selectable settings, [reference page]
Auto : Increases the tuner selectivity to reduce interference noises
between adjacent stations. (Stereo effect may be lost.)
Wide : Subject to the interference from adjacent stations, but sound
quality will not be degraded and the stereo effect will remain.
You can determine the use of LINE IN and VIDEO IN plugs.
Off : Select when no component is connected ("AV-IN" is skipped while
selecting the source).
Audio&Video : Select when connecting an AV component such as a
VCR.
Audio : Select when connecting an audio component such as a digital
audio player.
Camera*
Camera Mirror*
the monitor. (The monitor on the unit only; the normal rear view
appears on the external monitor.)
Navigation : Select when connecting a Navigation System. ☞ [41]
9
For connecting an external component to the CD changer jack on the
rear.
Changer/iPod/D. Player*
☞ [38, 40]
External Input : Any other than the above. ☞ [42]
Off : Cancels.
On : Activates the key-touch tone.
11
Off : Cancels.
Muting1, Muting2 : Select either one which mutes the sounds while
using the cellular phone.
Initialize all settings you have made in <AV Menu>. Press ENT, then
reset the unit. (☞ page 3)
8
: Select when connecting the rear view camera.
8
: The mirror image of the rear view is displayed on
10
: CD changer, iPod, or D. player
50