Level 1 and 2 Service Manual
Installing the PCB into the Front Housing
68000222001-B
Note! Do not stress the flex or press on the display glass.
1.
Remove the liner from the Mic Mesh in the front housing.
2.
Place and Press the Keyboard connector firmly into the PCB BTB connector.
3.
Remove the liner from the display and also from the inside of the front housing.
(Do not touch glass with after removing the liners).
Figure 33. Attaching Flex Connectors to Main PCB
4.
Clean the front housing lens and display with ionized air.
November 10, 2008
Assembly
v541661
41