Adjusting The Picture Quality - JVC HR-XVC29UJ Instructions Manual

VFP function

— Adjusting the picture quality

The VFP (Video Fine Processor) function enables you to adjust
the picture character according to the type of programming,
picture tone or personal preference.
NOTE:
Before you start operation;
The VFP setting screen disappears if no operations are done for
more than about 10 seconds. If the setting screen disappears
before you finish, start from step 1 again.
1
Access the VFP setting menu.
Press DVD PICTURE during
playback.
The current setting appears on
the TV screen.
2
Select the VFP mode.
Press w e repeatedly.
Each time you press w e, the VFP mode changes as follows:
NORMAL]CINEMA]USER 1]USER 2](Back to the
beginning)
NORMAL
: Select this normally.
CINEMA
: Suitable for movie.
USER 1 USER 2
/ : You can adjust parameters that affect
picture appearance and store settings. Go
to step 3.
NOTE:
You cannot adjust the parameters of "NORMAL" and
"CINEMA".
To adjust picture appearance manually
3
Access USER menu.
Press w e repeatedly to
select "USER 1" or "USER 2".
4
Select the parameter.
Press rt repeatedly to select a parameter you want to
adjust, then press ENTER.
Adjust gradually and confirm picture appearance results are as
preferred.
GAMMA
(–3 to +3)
BRIGHTNESS
(–8 to +8)
CONTRAST
(–7 to +7)
SATURATION
(–7 to +7)
TINT
:
(–7 to +7)
SHARPNESS
NORMAL
0
GAMMA
(–8 to +8)
BRIGHTNESS 0
0
CONTRAST
0
SATURATION
VFP menu disappears and the following pop-up window
TINT 0
+3 appears on the TV screen.
SHARPNESS
The selection menu disappears automatically if you do not
change the selection for 10 seconds.
5
Adjust the parameter.
Press rt repeatedly to change the setting, then press
ENTER.
The current VFP settings appear again.
6
Adjust the other parameters.
Repeat steps 4 and 5 to adjust other parameters.
To return to the normal screen
Press DVD PICTURE.
To activate your setting
Press DVD PICTURE, then press w e repeatedly to select
"USER 1" or "USER 2" that you have changed the
parameters.
USER 1
0
GAMMA
BRIGHTNESS 0
0
CONTRAST
SATURATION 0
0
TINT
+3
SHARPNESS
: Controls brightness of neutral tints while
maintaining brightness of dark and bright
portions.
: Controls screen brightness.
: Controls screen contrast.
: Controls screen color depth.
Controls screen tint.
: Controls screen sharpness.
GAMMA
GAMMA 0
45
EN
0