Garmin GPSMAP 60CSx Quick Manual page 2

the up-down buttons to get to Save and use Enter button to say 'yes' and then Enter
again on the OK window to save any existing tracks (in case someone else wants it). Then
select Clear, press Enter, move to Yes, press Enter again. Then Page to get back to what
ever page you wish to look at.
7. Mark waypoints. When you find something you want to record the location of, press
Mark (bottom left key), and you can use the up-down buttons to rename if you want. I
find it quicker to leave the default name (a number) and write that on the datasheet. Its
worth while writing the co-ordinates as well as the waypoint on the datasheet as a
backup in case the unit data gets lost/ destroyed.
8. Measure distance to last waypoint. If you mark say a weed that spreads for 10 or more
metres, walk to the far end of the infestation and push the Find button and Enter on the
Waypoints icon. You then choose the waypoint you made at the first edge of the
infestation, select Enter and the distance back to that waypoint will be in the bottom
right window – telling you how long the infestation is.
9. Find waypoint. There are several ways you can find a waypoint, either the nearest one,
the most recent one, or by typing in the name/number. Push Find/Enter/Menu to select
which option you want if the default is not your preferred option. Find nearest is probably
the most useful option.
Set co-ordinates. Push Page (middle button on right hand side of key pad) until you get to a
page with a bunch of little square pictures. Use the left-right-up-down buttons in the middle of
the key pad to Setup and press the Enter button, then the up-down again to get to Units and
press Enter. The first window is where you set units, so press Enter and scroll up-down til you
find New Zealand NZTM and Enter again. Then press Page to return to the Satellite page and
check it now says NZTM next to the co-ordinates