Motorola Moto G User Manual page 49

Connect & transfer
Connect & transfer
Quick start: connect & transfer
Bluetooth® wireless
Wi-Fi networks
USB cables
Share your data connection
Data use
Your cloud
Phone & tablet
Virtual Private Networks (VPN)
Mobile network
Flight mode
Menu More
Back Next
Wi-Fi networks
Turn Wi-Fi power on/off
Find it: Apps > , then touch the
Settings
turn it
ON
Note: To extend battery life, turn the Wi-Fi switch
you're not using it.
Connect to networks
To find networks in your range:
1 Touch Apps > >
Settings Wi-Fi
Tip: To show your phone's MAC address and Wi-Fi settings,
touch Menu > .
Advanced
2 Make sure the switch at the top is
> SCAN .
3 Touch a found network to connect it (if necessary,
enter , and
Network SSID Security Wireless password
touch ).
Connect
When your phone connects, the Wi-Fi status
indicator appears in the status bar.
Note: If you see a question mark in the Wi-Fi status
indicator , flick the status bar down, touch the network
and enter the network's password.
Tip: When Wi-Fi power is on, your phone automatically
reconnects to available networks it has used before.
Manage networks
To remove a network, touch it in the list, then touch
To manage your networks, touch Apps
switch to
Wi-Fi
> Wi-Fi
networks
when
OFF
Wi-Fi hotspot
Your can make your phone a Wi-Fi hotspot to provide portable,
convenient Internet access to other Wi-Fi-enabled devices.
Note: Keep it secure. To protect your phone and hotspot from
.
unauthorised access, it is strongly recommended that you set
up hotspot security (WPA2 is the most secure), including
password.
Find it: Apps
, then touch Menu
ON
hotspot
1 Your phone turns off
network for internet access. Touch
and
set up security:
• Network SSID: enter a unique name for your hotspot.
• Security: select the type of security you want:
•
>
, turn Wi-Fi power on, then touch Menu >
.
> > >
Settings More Tethering & portable
and tick Portable Wi-Fi hotspot
power and uses the mobile
Wi-Fi
Set up Wi-Fi hotspot
WPA2 . For WPA2 , enter a unique password that others
will need to access your Wi-Fi hotspot.
Note: WPA2 is recommended by IEEE.
Hotspot frequency band : if you notice interference after
your hotspot has been active for a while, try different
channels.
.
Forget
Settings
Manage
to
or
open