Audio Cd Operations; Playing Back A Track; Resuming Playback - JVC XV-1000 XV-1000BK Instructions Manual

Audio CD Operations

Playing back a track

1 2 3
4 5 6
7 8 9
0
10
+100 +10

Resuming playback

RESUME
RESUME
30
This chapter explains all the functions of the XV-1000BK for playing back audio CDs.
Read "Basic Operations" on pages 19 and 20 before reading this chapter.
7 Using 4 / ¢ buttons during playback
Pressing ¢ causes the XV-1000BK to jump to the next track and start playback.
Therefore, press ¢ as many times as required to jump to the desired track and
start playback.
Similarly, pressing 4 causes the XV-1000BK to jump to the beginning of the
current track and start playback. By pressing it again, the XV-1000BK jumps to
the previous track and starts playback.
7 Using numeric keys
You can also use the numeric keys on the remote control unit to select a track
number. The XV-1000BK automatically starts playback from the selected track
regardless of the player's mode.
See page 16 for details about how to use the numeric keys.
The XV-1000BK can memorize a position on a disc you specify and resume playback
from that position later.
7 Memorizing a position
1. Press RESUME during playback to memorize the current playback position.
When memorized, the RESUME indicator on the front panel lights.
* Switching the power to STANDBY during playback current memory.
The STANDBY memory settings then become valid.
To clear the memory:
Take out the disc from the disc tray.
* The memory is not cleared by switching the power to STANDBY.
* The last memory overrides the previous memory.
7 Resuming playback
1. Press the RESUME button when the power is in the standby mode.
The player will locate the memory position and start playback.