JVC AX-V55BK Instructions Manual page 22

Page 21
6. Press Control % % % % % / fi fi fi fi fi until "–DELAY +" appears on the display.
7. Press Control @ @ @ @ @ / # # # # # to adjust the delay time of the rear speaker output.
Each time you press the button, the delay time changes as follows:
DELAY 1 DELAY 2
DELAY 1 Select this when the distance from you to your rear speakers is greater than that to the
front speakers.
DELAY 2 Select this when the distance from you to your rear speakers is almost equal to that to
the front speakers.
DELAY 3 Select this when the distance from you to your rear speakers is less than that to the front
speakers.
Note:
When you have selected "3CHLOGIC," you cannot adjust the delay time.
8. Press Control % % % % % / fi fi fi fi fi until "TEST" appears on the display, then press Control @ @ @ @ @ / # # # # # to start
checking the speaker output balance.
"TEST" starts flashing on the display, and a test tone comes out of the speakers in the following
order:
Left front
speaker
Notes:
• No test tone comes out of the rear speakers when you have selected "3CHLOGIC."
• No test tone comes out of the center speaker when you select "PHANTOM" or "OFF" for the center
mode.
9. If necessary, adjust the speaker output balance as follows:
• To adjust the rear speaker output level, press Control % / fi until "– REAR +" appears on the
display, then press Control @ / #.
• To adjust the center speaker output level, press Control % / fi until "–CENTER+" appears on the
display, then press Control @ / #.
Notes:
• The sound levels of the left and right rear speakers will be the same.
• You cannot set the sound level of the rear speakers when you have selected "3CHLOGIC."
• You cannot set the sound level of the center speaker when you select "PHANTOM" or "OFF" for the
center mode.
10. Press Control % % % % % / fi fi fi fi fi until "TEST" appears on the display, then press Control @ @ @ @ @ / # # # # # to stop the
test tone.
DELAY 3
Center Right front
speaker speaker
Rear
speakers