JVC LYT0633-001A Instructions Manual page 59

SYMPTOM
19. The Video Echo mode
does not work.
20. Even when Slow Shutter is
not selected, the image
looks like it is activated.
21. There is no strobe when
the Classic Film or Strobe
mode is activated.
22. White Balance cannot be
activated.
23. When shooting a subject
illuminated by bright light,
vertical lines appear.
24. When the screen is under
direct sunlight during
shooting, the screen
becomes red or black for
an instant.
25. During recording, the date/
time does not appear.
26. The indicators and
messages do not appear.
POSSIBLE CAUSES
19. •The Picture Wipe or
Dissolve functions are in use.
•"WIDE MODE" is set to
"SQUEEZE" or "PS-WIDE"
in the Menu Screen.
•A Fade-In or Fade-Out is in
progress.
20. •When shooting in the dark,
the unit becomes highly
sensitive to light and the
image takes on an effect
similar to Slow Shutter.
21. •The Picture Wipe or
Dissolve function is in use.
22. •The Sepia or Monotone
mode is activated.
23. •This is a result of exceed-
ingly high contrast, and is
not a malfunction.
24. •This is not a malfunction.
25. •"DATE/TIME" is set to
"OFF" in the Menu Screen.
•Self-Recording is performed.
26. •"ON SCREEN" is set to
"SIMPLE" or "TIME CODE"
is set to "OFF" in the Menu
Screen.
CORRECTIVE ACTION
19. •Set "WIDE MODE" to
"CINEMA" or "OFF" mode
( pg. 24).
•Do not try to use the Video
Echo mode during a Fade-In
or Fade-Out (
20. •If you want the lighting to
look more natural, set
"GAIN UP" to "AGC" or
"OFF" in the Menu Screen
( pg. 23).
21. •Do not try to use the Classic
Film or Strobe mode during
a scene transition
( pg. 28, 30).
22. •Turn off Sepia or Monotone
before setting White
Balance ( pg. 30, 33).
23.
————
24.
————
25. •Set "DATE/TIME" to "ON"
in the Menu Screen
( pg. 25).
•During Self-Recording, the
date/time does not appear
( pg. 15).
26. •Set "ON SCREEN" to "LCD"
or "LCD/TV" and set "TIME
CODE" to "ON" in the
Menu Screen (
35).
CONTINUED ON NEXT PAGE
59
EN
pg. 28, 30).
pg. 25,