Connecting The Power Supply - JVC KY-F550E Instruction Manual

2. Preparation Before Shooting (continued)

Connecting the Power Supply

Connect the [DC IN] terminal at the back of this unit to the [TO CAMERA] terminal of the AC adaptor (AA-
P700) using the power cable supplied (2 m).
AC IN
Plug
Notes
● Ensure to make use of AA-P700 for the power supply.
When connecting, ensure that power switch of AA-P700 is turned OFF.
Connecting with the power on may give rise to malfunction of the equipment.
● When power is supplied, it takes several seconds before this unit is operable.
When the "SHUTTER" item under "EXPOSURE" screen is set to "SLOW", it might take even longer time.
● Allow a 10 second interval after switching off the power before turning on again. If the power switch is
turned ON and OFF too soon, malfunctioning such as startup failure may occur.
Caution
In case of medical use
Make sure to use the specified AC Adapter.
UK Market ................................... AA-P700EK
Other European Market ............. AA-P700EG
E-18
AC Adapter
AA-P700
DC 12V=OUTPUT
AC 230 V
S(Y/C) OUTPUT TO CAMERA
EITHER
OUTPUT
MAX 1.25A
White Marking
Connect the end with
white marking to the
AC adaptor.
Ring
RGB, Y/C, SYNC OUT
VIDEO OUTPUT
LENS
TRGGER
SEE INST-
RUCTION
MANUAL
[TO CAMERA] Terminal
Power Cable (2 m)
(accessories)
● Insert plug fully, turn ring and ensure
that it is fastened.
DV
VIDEO OUT
POWER
DC IN
REMORT
SEE INSTRUCTION MANUAL
[DC IN]
Terminal