Date/Time Settings - JVC GR-DVM55 Instructions Manual

Power lamp
MENU Wheel
Display
W I PE / FADER OF F
PROGR AM AE
W. BAL AN E C
CAMER A
MANUA L
SYSTE M
D I SPL AY
DSC
END
ON SC RE N E – LCD / TV
DATE / T I ME – A U T O
T I ME CODE – O F F
CLOCK D E C 25 '01
ADJ . : 5 30 PM
RETUR N
CLOCK D E C 25 '01
ADJ . : 5 30 PM

Date/Time Settings

The date/time is recorded onto the tape at all times, but its
display can be turned on or off during playback
Power Switch
(
1
Lock Button
2
3
4
Built-in Clock's Rechargeable Lithium Battery
To store the date/time in memory, the clock's rechargeable
GR-DVM75 only
lithium battery is integrated in the camcorder. While the
camcorder is connected to an AC outlet using the AC
Power Adapter/Charger, or while the battery pack attached
DISPLAY Menu
to the camcorder continues to supply power, the clock's
rechargeable lithium battery is always charged. However,
if the camcorder is not used for approx. 3 months, the
clock's lithium battery will become discharged and the
date/time stored in memory will be lost. When this occurs,
first connect the camcorder to an AC outlet using the AC
Power Adapter/Charger for over 24 hours to charge the
clock's rechargeable lithium battery. Then perform the
date/time setting before using the camcorder.
Note that the camcorder can be used without setting the
date/time.
NOTE:
Even if you select "CLOCK ADJ.", if the parameter is not
highlighted the camcorder's internal clock continues to
operate. Once you move the highlight bar to the first
date/time parameter (month), the clock stops. When you
finish setting the minute and press the MENU Wheel in,
the date and time begin operation from the date and time
you have just set.
pg. 42, 43).
Set the Power Switch to "
the Lock Button located on the switch, then open
the LCD monitor fully or pull out the viewfinder
fully. The power lamp lights and the camcorder is
turned on.
Press the MENU Wheel in. The Menu Screen
appears.
Rotate the MENU Wheel to select "
Press it and the DISPLAY Menu appears.
Rotate the MENU Wheel to select "CLOCK ADJ.".
Press it and "month" is highlighted.
Rotate the MENU Wheel to input the month. Press
it. Repeat to input the day, year, hour and minute.
Rotate the MENU Wheel to select " RETURN", and
press it twice. The Menu Screen closes.
11
EN
" while pressing down
DISPLAY".