Power Supply - Panasonic RF-3100 Operating Instructions Manual

POWER SUPPLY
I
Battery Operation:
1)
Open the Battery
Compartment Cover,
as
shown
in the
figure.
2)
lnserl 8
"D"
size (Panasonic UM-1 or equivalent) batteries into
the
Battery Compartment, making sure that the batteries
are
installed in the specified numerical order, and that the
proper
polarities
(@
and Q) are maintained.
3)
Replace the Battery Compartment Cover.
Note:
Be sure to set the Power Switch to "OFF",
when turning the
set
off.
Unplugging the AC Power Cord from the AC outlet
automatically
switches
from AC to battery operation,
but
does
not turn the unit
of
f .
oWhen
removing the batteries, start
by first lifting up the
@
side
ol
the "No.
7"
battery.
oBattery Condition:
1)
Setthe
Power Switch
to
"ON".
2)
The
Power lndicator will then show the battery condition.
k-
Strong
--+p-
Weak
--------r3-
Dead
------N
FishtR"E
I
AG
PowerOperation
1)
Open
the
AC Power Cord Compartment,
as
shown
in the
figure.
2)
Extend the AC power cord
and position the
cord in the cabinet
opening provided.
3)
Plug the AC Power Cord
into an
AC power outlet.
The
unit will automatically switch from battery
to AC operation.
{}
power outlel
AC
120
V
@
?
AC
Dull Red
POWER
POWER
'.1,2
-o-
o
/l\
.-
With weak batteries, the
sound will become dis-
torted,
especially at high
volume levels.
Io,t_.-l
POWER
o
-2-