Using The Optional Remote Control Unit; Installing The Battery - JVC GR-DVL155 Instructions Manual

40
EN
A
2
1
B
2
1
Knob
1
Remote sensor

USING THE OPTIONAL REMOTE CONTROL UNIT

1 1
3
Lock hole
3
When using the remote control, be sure to point it at the remote
sensor. The transmitted beam's approximate effective distance
for indoor use is 5m.
The transmitted beam may not be effective or may cause
incorrect operation outdoors or when the remote sensor is directly
exposed to sunlight or powerful lighting.
The Full-Function Remote Control Unit can operate
this camcorder from a distance as well as the basic
operations (Playback, Stop, Pause, Fast-Forward and
Rewind) of your VCR. It also makes additional
playback functions possible.

Installing The Battery

(RM-V700U, optional)
The remote control uses one lithium battery
(CR2025).
1
There are 2 ways to pull the battery holder out of
the RM-V700U.
: Pull out the battery holder while sliding the lock
hole.
: Pinch the release tab and pull out the battery
holder.
2
Insert the battery in the holder, and be sure to
have the "+" mark visible.
3
Slide the holder back in until you hear a click.
• Read the caution concerning lithium batteries in the
RM-V700U instruction manual.