Applying The Decals - Traxxas Rustler 3705 Owner's Manual

Decorating your Model

Applying The Decals

The decals are printed on self-
adhesive clear mylar and are
die-cut for easy removal. Use a
hobby knife to lift the corner of a
decal and lift it from the backing.
To apply the decals, place one end
down, hold the other end up, and
gradually smooth the decal down
with your finger as you go. This will
prevent air bubbles. Placing both
ends of the decal down and then
trying to smooth it out will result in
air pockets.
Look at the photos on the box for
typical decal placement.
Attaching The Rustler Wing
Use double-sided tape pre-applied
to the wing to secure the wing to the
Rustler body.
Traxxas • 9