Table of Contents
Advertisement
Backlight Compensation
Backlight compensation brightens the subject
quickly.
With simple operation, backlight compensation
feature brightens the dark subject portion by
increasing the exposure.
1
Set the Power Switch to "M".
2
Press BACK LIGHT so that the Backlight
Compensation indicator "
To cancel Backlight Compensation
Press BACK LIGHT twice so that the "
indicator disappears.
NOTE:
Using Backlight Compensation may cause the light
around the subject to become too bright and the
subject to become white.
" appears.
"
FEATURES FOR RECORDING
Spot Exposure Control
Selection of a spot metering area enables more
precise exposure compensation. You can select
one of the three metering areas on the LCD
monitor/viewfinder.
1
Set the Power Switch to "M".
2
Press BACK LIGHT twice so that the Spot
Exposure Control indicator "
A spot metering area frame appears at the
centre of the LCD monitor/viewfinder.
3
Press + or – to select the desired spot
metering area frame.
4
Press MENU.
Spot Exposure Control is engaged.
Exposure is adjusted to make the brightness of
the selected area most appropriate.
To lock the iris
After step 3, press and hold MENU over 2
seconds. The "
" indication appears and the
iris is locked.
To cancel Spot Exposure Control
Press BACK LIGHT once so that the "
indicator disappears.
NOTES:
You cannot use the Spot Exposure Control at the
same time with following functions.
• "SQUEEZE" in "WIDE MODE" (
• "STROBE" in "PROGRAM AE" (
• Digital Zoom (
pg. 18)
• Manual Exposure Control
Depending on the shooting location and condition,
optimum result may not be attained.
33
EN
" appears.
"
pg. 26)
pg. 36)
Advertisement
Table of Contents
