Toyota Camry 2001 Owner's Manual page 128

Hide thumbs Also See for Camry 2001:
Table of Contents

Advertisement

For
high−pitch
tone
adjustment,
"CONTROL
/
MODE"
repeatedly
"TRE" appears on the display. Then turn
the knob to suit your preference.
The display will show the range from
"TRE −5" to "TRE 5".
Sound balance adjustment function—
This knob is also used to adjust the
sound balance between the front and rear,
and the right and left speakers.
For front/rear adjustment, push "CONTROL
/ MODE" repeatedly until "FAD" appears
on the display. Then turn the knob to
adjust the front/rear balance.
The display will show the range from
"FAD−F7" to "FAD−R7".
For left/right adjustment, push "CONTROL
/ MODE" repeatedly until "BAL" appears
on the display. Then turn the knob to
adjust the left/right balance.
The display will show the range from
"BAL−L7" to "BAL−R7".
DISC
By using this button, you can select a
disc you wish to listen to.
Push either side of the button until the
number of the disc you want to listen to
appears on the display.
120
'01Camry_U (L/O 0009)
push
Dolbyr
B NR
until
If you are listening to a tape that was
recorded with Dolbyr B Noise Reduction,
push the button marked with the double−D
symbol. The double−D symbol will appear
on the display. Push the button again to
turn off Dolbyr B NR.
The Dolby NR mode reduces tape noise
by about 10 dB. For best sound reproduc-
tion, play your tapes with this button on
or off according to the mode used for
recording the tape.
: Dolby noise reduction manufactured under license from
Dolby Laboratories Licensing Corporation. "DOLBY" and the
double D symbol
are trademarks of Dolby Laboratories
Licensing Corporation.
FM1·2
Push "FM1·2" to turn on the radio and
select the FM band. "FM1" or "FM2" will
appear on the display. This system allows
you to set twelve FM stations, two for
each button.
If the audio system is off, you can turn
on the radio by pushing "FM1·2". Also,
push "FM1·2" to switch from cassette or
compact disc operation to radio operation.
2001 MY CAMRY (OM33528U)
LOAD
This button is used to load the compact
discs in the compact disc auto changer
which is integrated with the radio and cas-
sette
player.
This
compact
disc
changer can store up to 6 discs.
The key must be in the "ACC" or "ON"
position.
Loading one compact disc only—
To load one compact disc only, quickly
push and release the button. If you hold
the button too long (if the audio system
is on at this time, you hear a beep.), the
mechanism will change to the mode for
loading
multiple
compact
discs.
pushing the button, insert a compact disc.
At this time, the indicators on both sides
of the slot are flashing. After the disc is
loaded, the shutter of the slot will close
and the indicators will stop flashing.
If no compact disc is inserted, the shutter
will close after 15 seconds.
auto
After

Advertisement

Table of Contents
loading

Table of Contents