Reconfigure Your Current Equipment; Six Simple Steps To Move - EE Bright Box Setup Manual

Do this on the day of your engineer appointment
ENGINEER vISIt
1.1 the engineer will change your telephone socket and
connect the modem for you.

RECONFIGURE YOUR CURRENt EqUIpmENt

2.1
2.1 Disconnect any
broadband filters from other
telephone sockets.
2.2 If you have a telephone
cable reconnect it directly to
the telephone socket.
18
GEttING StARtED - mOvING tO FIbRE bROADbAND
1.2 Connect the black
ethernet cable, provided, to
the modem.
2.3
2.3 Disconnect the grey
broadband cable.
2.4 Remove any ethernet
cable currently connected to
the red WAN port, re-connect
the Ethernet cable to an
available port.
CONNECt AND tURN ON YOUR ROUtER
3.1
CHECK It OvER
Everything should now look like this, the power light will go
green. the broadband light will go green once you've completed
step 4.
power
3.2
ethernet

SIX SImpLE StEpS tO mOvE

1. Open a web browser.
(you will not be connected to the internet).
2. type http://192.168.1.1 into the browser address bar and click go.
the username is admin, and password is on your 'KEEp mE'
card or on a sticker on the bottom of your router.
3. Select the basic set-up tab at the top of the screen.
4. Select the migration wizard from the menu on the left hand side.
5. press the fibre/ethernet button.
6. press OK on the pop-up to proceed. the migration countdown
will begin. You can now close your browser.
GEttING StARtED - mOvING tO FIbRE bROADbAND
plug the other end of
the black Ethernet cable
connected to the modem
into the red WAN port on
your router.
power
19