Autoposition; H (Horizontal) Position; Vertical) Position; Phase - Sanyo CE42FD17-B Instruction Manual

Autoposition

If you shift the picture horizontally or vertically
to an unwanted position, use this item to put
the picture into correct place automatically.
This setting therefore automatically optimizes
the display.
Select Autoposition item by using " " or " "
buttons. Press OK or " ", " " button.
Warning : Please ensure auto adjustment is
performed with a full screen image to ensure
best results.

H (Horizontal) Position

This item shifts the image horizontally to right
hand side or left hand side of the screen.
Select H Position item by using " " or "
" button. Use " " or " " button to adjust the
value.
V (Vertical) Position
This item shifts the image vertically towards the
top or bottom of the screen.
Select V Position item by using " " or "
" button. Use " " or " " button to adjust the
value.

Phase

Depending on the resolution and scan frequency
that you input to the TV set, you may see a hazy
or noisy picture on the screen. In such a case
you can use this item to get a clear picture by
trial and error method.
Select Phase item by using " " or " " buttons.
Use " " or " " button to adjust the value.

Dot Clock

Dot Clock adjustments correct the interference
that appear as vertical banding in dot intensive
presentations like spreadsheets or paragraphs
or text in smaller fonts.
Select Dot Clock item by using " " or "
" buttons. Use " " or " " button to adjust the
value.

PC Picture Menu

For adjusting PC picture items, do the
following:
Press " " or " " button to select the second icon.
PC Picture menu appears on the screen.
Brightness, Contrast, Colour and Colour
Temperature settings in this menu are identical
to settings defi ned in TV picture menu under
"Analogue TV Menu System".
Note : If you set Colour Temp as User, you can defi ne
R, G, B settings manually.

Sound Menu

The items in this menu are described at "Sound
Menu" section explained in "Menu System".

Feature Menu

Feature menu settings are identical to the
settings explained in " Feature Menu " section
in " Menu System ".

Source Menu

Source menu settings are identical to the
settings explained in " Source Menu " section
in " Menu System ".

Displaying TV Information

Programme Number , Programme Name ,
Sound Indicator and Zoom Mode information is
displayed on the screen when a new programme
is entered or INFO button is pressed.

Mute Function

Press "
indicator will be displayed in the upper side of
the screen.
To cancel mute, there are two alternatives; the
fi rst one is pressing the " " button and the
second one is increasing the volume level.
PIP (Picture-in-Picture) and
PAP (Picture-and-Picture)
Modes
Press the "PIP" button to switch to PIP mode.
At PIP Mode, a small picture (PIP picture) is
displayed on the main picture. There are 1
size and 4 positions (upper left, upper right,
bottom left and bottom right) available for the
PIP window. Aspect Ratio of the PIP window is
fi xed and 4:3.
When PIP Mode is entered, the default active
window is the PIP window and the active window
is indicated by a red frame around it. The active
window can be changed by pressing " "
or " " button. The status info OSD belongs to
active window. The place of the status OSDs
are same for both windows.
English - 41 -
" button to disable sound. Mute