Honda TRX500FE Owner's Manual page 130

Engine Oil & Filter
5. Reinstall the oil filter cover, making sure the bolts are tightened to the
specified torque:
7 lbf·ft (10 N·m , 1.0 kgf·m)
6. Install the right engine sub cover.
7. Pour the drained oil into a suitable container and dispose of it in an
approved manner (page
Improper disposal of drained f luids is harmf ul to the environment.
Add Engine Oil:
1. Reinstall the oil drain plug with a new sealing washer, and tighten it
to the specified torque:
18 lbf·ft (25 N·m , 2.5 kgf·m)
2. Fill the crankcase with the recommended grade oil approximately:
2.6 US qt (2.5 )
3. Reinstall the oil fill cap/dipstick.
4. Start the engine and let it idle for 3 5 minutes.
5. Stop the engine, wait 2 3 minutes and check the oil level. Make sure
the oil is between the upper and lower level marks on the oil fill cap/
dipstick. If necessary, add more oil but do not overfill.
6. Check that there are no oil leaks.
7. Install the left engine sub cover.
If a torque wrench is not used for installation, see your Honda dealer as
soon as possible to verify proper assembly.
122 Servicing Your Honda
184 ).