Buick Enclave 2011 Owner's Manual page 400

too. And do not connect the
negative ( ) cable to the
negative ( ) terminal on the dead
battery because this can cause
sparks.
6. Connect the red positive (+)
cable to the positive (+) terminal
of the dead battery.
Use a remote positive (+)
terminal if the vehicle has one.
7. Do not let the other end touch
metal. Connect it to the
positive (+) terminal of the
good battery. Use a remote
positive (+) terminal if the vehicle
has one.
8. Now connect the black
negative ( ) cable to the
negative ( ) terminal of the
good battery. Use a remote
negative ( ) terminal if the
vehicle has one.
Do not let the other end touch
anything until the next step. The
other end of the negative ( )
cable does not go to the dead
battery. It goes to a heavy,
unpainted metal engine part,
or to a remote negative ( )
terminal on the vehicle with the
dead battery.
Vehicle Care
9. Connect the other end of the
negative ( ) cable at least
18 inches (45 cm) away from
the dead battery, but not near
engine parts that move.
The electrical connection is just
as good there, and the chance
of sparks getting back to the
battery is much less.
Your vehicle has a remote
negative ( ) terminal for this
purpose.
10-87