Timer Recording; Manually Programming Timer Recordings; Check, Change Or Delete A Programme - Panasonic Diga DMR-EX773 Operating Instructions Manual

Timer recording

See also "Notes for recording" (
Depending on the type of disc used for recording or the type of
broadcast, there may be restrictions on the title you are trying to
record.
[HDD] [RAM] [-R] [-RW‹V›] [+R] [+RW]
≥You can enter up to 32 programmes up to a month in advance.
(Each daily or weekly programme is counted as one programme.)
[RAM] [-RW‹V›] [+R] [+RW]
≥To use a new disc, formatting is necessary.
Note
You cannot switch subtitles during timer recording.
Preparation
≥Turn on the television and select the appropriate video input to suit
the connections to this unit.
≥If recording to DVD, insert a disc that you can use for recording
( 11).
≥Make sure that the clock settings are correct (
Manually programming timer
recordings
1
Press [PROG/CHECK].
Timer Remain HDD
Recording
No. Channel Date Start
New Timer Programme
2
Press [3, 4] to select "New Timer
Programme" and press [OK].
3
Press [2, 1] to move through the
items and change the items with
[3, 4].
Timer
Remain HDD
Recording
Channel Date Start
1 ARD 19. 10. TUE 22:00
All Channels : ARD
≥When "Channel" is selected, you can press the "Blue" button
to change the category [e.g., TV, Radio, Favourite (
and then press [3, 4] to select the channel you want to
record.
≥Press and hold [3, 4] to alter the Start (Start time) and Stop
(Finish time) in 30-minute increments.
≥You can also set Channel (Programme position/TV Station
Name), Date, Start (Start time), and Stop (Finish time) with
the numbered buttons.
≥Date
[.
Date:
l
;:
l
Daily timer:
l
;:
l
a.
Weekly timer: SUN>--->SAT
Titles recorded using the same daily or weekly timer are
bundled and displayed as a "group" in the
DIRECT NAVIGATOR screen (
Auto Renewal Recording.
≥You can also press [DRIVE SELECT] to select the recording
drive.
When the recording drive is "DVD" and there is not enough
remaining space, recording automatically switches to the
"HDD" ( 25, Relief Recording).
≥You can also press [REC MODE] to change the recording
mode.
≥[HDD] RENEW (Auto Renewal Recording) (
ON!)OFF
≥Programme Name
Press [2, 1] to select "Programme Name" and press [OK].
( 44, Entering text)
≥STTL (Subtitles)
AUTO!)OFF
When the "Channel" column is set in AV1 or AV2, this setting is
unavailable.
VQT2J39
You can also press [STTL
24
20).
64).
30:24 SP DVD 1:58 SP
TUE 12.10.10. 12:54:00
HDD
Drive
Stop DVD Mode STTL space
1:58 SP
30:24 SP DVD
TUE 12.10.10. 12:54:00
HDD
Stop Mode
DVD STTL
22:30 HDD SP OFF
Programme Name
Current date up to one month later minus
one day
SUN-SAT>MON-SAT>MON-FRI
27) except when using
25)
] to switch "STTL" setting.
When there are multiple languages, select the subtitle
( 60, DVB Preferred Language).
4
Press [OK].
The timer programme is stored and the timer icon is
displayed.
"F" lights on the unit's display to indicate timer recording
standby has been activated.
TUE 14.10.09. 12:56:00
HDD
Stop Mode
DVD
22:30 HDD
ogramme
Repeat steps 2–4 to programme other recordings.
Press [Í] to turn the unit off.

Check, change or delete a programme

≥Even when the unit is turned off, you can display the timer
recording list by pressing [PROG/CHECK].
Press [PROG/CHECK].
Timer
Recording
No. Channel
Press OK to store new programme.
A Icons
F Timer recording standby is activated.
This programme is currently recording.
[
Programmes are overlapped. Recording of the programme
with the later start time starts when the earlier programme
finishes recording.
You stopped a daily or weekly timer recording. The icon
59)]
disappears the next time the timer programme starts
recording.
The disc was full so the programme failed to record.
The programme was copy-protected so it was not recorded.
The programme did not complete recording because the disc
X
is dirty or some other reason.
Timer programmes set to Auto Renewal Recording (
Titles that have been rerouted to the HDD
(Displayed while recording.)
HDD Recording drive is set to HDD
DVD Recording drive is set to DVD
B Message displayed in the "Drive space" line
OK: Displayed if the recording can fit in the remaining
space.
> (Date):
For recordings made daily or weekly, the display will
show until when recordings can be made (up to a
maximum of one month from the present time) based
on the time remaining on the disc.
! : It may not be possible to record because:
≥there is not enough space left.
≥the number of possible titles has reached its
maximum.
≥programmes are overlapped.
≥programmes are deactivated.
Relief: Timer programmes that will be relief recorded to the
HDD.
C Channel name, programme name and other
information are displayed.

Timer icon
Drive
space
STTL
Check to make sure "OK" is
SP OFF OK displayed (
Remain HDD 30:24 SP DVD 1:58 SP
TUE 12.10.10. 12:54:00
HDD
Drive
Date Start Stop DVD Mode STTL space
New Timer Programme
OK
RETURN
No. Channel
01
ARD
below).
25).