Record Search And Record Review - Canon Vistura Instruction Manual

Record Search and Record Review

REC SEARCH
Record search
When the camera is in record pause mode, you can use record search to play the tape forwards or
backwards to find the point where you want to start or restart recording. This is useful when you want to
add a new scene to a previously used cassette. By using record search, you can ensure a smooth, noise-free
join between the new scene and the old one.
1. Make sure the camera is in record pause mode.
2. Press and hold the REC SEARCH + or – button while you check the picture in the
viewfinder.
• The + button plays the recording forwards and the – button plays it backwards.
3. Release the button when you find the point where you want to start recording.
• The record search picture pauses briefly and then the camera returns to record pause mode.
Record review
When the camera is in record pause mode, you can use record review to play back the last few seconds of
your recording and then return automatically to record pause mode. You can quickly make sure that a scene
has recorded properly and then go on to shoot the next scene, without producing any noise in the picture.
1. Make sure the camera is in record pause mode.
2. Press and release the c button (the REC SEARCH – button) while you check the picture
in the viewfinder.
• The camera rewinds the tape and plays back the last few seconds.
• The camera returns to record pause mode at the point where you pressed the button.
Note:
• Noise or skew (picture distortion) may appear on the screen during record search and record review.
E
35