Advertisement
Follow these steps to setup Roland DisplayStudio™ media player and software using a networked
computer and internet connection. For alternative setup options, please download instructions at
www.rolanddga.com/displaystudio/setup.
1
PHYSICAL CONNECTIONS AND POWER
1a.
1b.
1c.
1e.
Power switch
Remote control
receiver
ESPAÑOL ADENTRO
a. Connect the HDMI cable (included) to the media
player HDMI output and to the LCD monitor input.
b. Connect the A/C power adapter (included) and
power cable (included) to the media player and
plug into an outlet.
c. To turn the media player on, press the power button
on the top corner.
for the light to turn on.
If using DisplayStudio bundled monitor:
d. Connect the power cord to the included monitor
and power outlet. Located on the back right hand
side of the monitor, turn the power switch to the
"On" position.
e. Located on the back bottom right corner of the
monitor, slide the remote control receiver down.
f. Power the monitor on with the remote control or
manually. The monitor will show the DisplayStudio
logo.
If using a monitor not supplied by Roland, please
follow the monitor instructions provided.
NOTE:
It may take 5-6 seconds
Advertisement
