Tuner Setup; Auto Tuner Setup; Channel Summary - JVC I'Art 0406TNH-II-IM User Manual

Auto Tuner Setup

The auto tuner setup function is described on page 18 as the interactive plug-in menu
(AV-27F577, AV-32F577 and AV-32WF47 ONLY). If you need to run the auto tuner setup
again, follow the steps below.
Press the M
To "Initial Setup"
π †
è
To enter
To "Auto Tuner Setup"
π †
è
To enter
è
To choose "Cable" or "Air"
To "Scan Mode"
π †
è
To choose "Auto", "STD", "HRC" or "IRC"
To "Start"
†
Press the O
The auto tuner is finished when the message "Programming Over !" appears onscreen.
Press the M
Notes:
• When the Tuner Mode is set to "Cable", it is possible to select "Scan Mode"
• If no channels were found using Auto Tuner Setup, check your antenna cable and the
settings for Tuner Mode/Scan Mode.

Channel Summary

Channel summary allows you to customize the line-up of channels received by your TV.
Regarding analog channels, you can add or delete channels from the line-up or prevent any
unauthorized viewers from watching any or all 191 channels. Regarding digital channels, the
only channels that will appear are the ones that are broadcasting.
Press the M
To "Initial Setup"
π †
è
To enter
To "Channel Summary"
π †
è
To operate
The Channel summary screen will now be displayed with
the channels set to scan marked with an "√". Regarding
analog channels, you can delete channels from the scan
by removing the "√". If any channels were missed during
auto tuner setup and you wish to add them, you may by
placing an "√" next to the channel number.
• Digital channels can not be added to the channel summary if the auto tuner setup did not
find them.
è
To the "Scan" column
π †
Press the O
Press the M
Note:
• The number of a digital channel may change, depending on the time of some broadcastings.
If this channel existed and now had disappeared, the lock channel or scanned channel by the
channel summary for that channel will be cancelled.
button
ENU
button (Programming will take serveral minutes)
K
button when finished
ENU
button
ENU
button to include or delete from scan
K
button when finished
ENU

Tuner Setup

–
+
Auto Tuner Setup
Tuner Mode
Scan Mode
Back
Select Operate
– +
Tuner Setup > Channel Summary
Ch No. Scan Station
001
002
003
004
005
006
OK
Select Operate
Cable
Auto
Start
MENU
Back Exit
FOX
ABC
CNN
NBC
BOX
NHK
Back MENU
Back Exit
33